AI驱动的设计应用
Philips Lumileds K2 LEDs with secondary optics, modeled in LightTools.
Larger ImagePhotorealistic rendering of three LEDs with collimators in a corner.
Larger ImagePhotorealistic Rendering of a speedometer and needle backlit with LEDs.
Larger ImageLED and collimator section with superimposed spatial performance.
Larger ImagePhotorealistic rendering of the lit appearance of a Philips Lumileds K2 LED.
Larger ImagePhotorealistic rending looking back into a CPC at the RGGB LED source.
Larger ImagePhotorealistic rendering looking back into a twisted CPC at the RGGB LED source.
Larger ImageAn LED map lamp was optimized for uniformity over the high-lighted dashboard surface.
Larger ImageMontage showing a room scene illuminated by an LED fixture with the show reflector.
Larger ImageCutaway of an LED-Driven Backlight Display showing the device structure and output illuminance map.
Larger ImageLit appearance rendering of a cellphone backlight and buttons.
Larger ImageThe merit function progression of a backlight pattern optimization.
Larger ImageScreen capture of a non-uniform backlight pattern optimization.
Larger ImageRepresentation of the merit function of a backlight pattern optimization.
Larger ImageEdge-lit backlight light guide with exaggerated extraction features.
Larger ImageEdge-lit light guide with diffuser and crossed brightness enhancing films.
Larger ImageOptimization of Illumination Schemes in a Head-Mounted Display Integrated with Eye-tracker.
Larger ImageFalse color image and illuminance chart of lit gas station modeled in LightTools.
Larger ImagePhotorealistic rendering of a runway threshold/end light.
Larger ImageShows a locus of simulated color points around the blackbody locus.
Larger ImageA street lamp and its far-field intensity distribution using intensity slices.
Larger ImageVarious 1D- and 2D-scans show the reflectance at various angles of incidence.
Larger ImageThe near-field illuminance and far-field intensity of an LED collimator.
Larger ImageStriations in the quasi-near field illuminance match LightTools predictions.
Larger ImageMontage showing a room scene illuminated by an LED fixture with the show reflector.
Larger ImageLightTools includes specialized utilities to help designers model and analyze solar collection systems.
The luminescent dye was modeled using the phosphor modeling capabilities of LightTools.
Larger ImageThe bottom-right graph shows, for various tilts, the collected power of the Fresnel lens system.
Larger ImageA user-defined variable tracks the sun and tilts each of the heliostats for best focus.
Larger ImageEach of the troughs is a perfect involute that reflects light onto all sides of the tube.
Larger ImageThe concentrator utility is used to easily create CPCs, CECs, CHCs, and involutes.
Larger ImageA rendering of an office with (bottom) and without (top) a micro-prism film.
Larger ImageA diagram showing each of the Bezier parameters for a skinned CPC.
Larger ImagePhotorealistic Rendering of the lit appearance of a Sylvania 3157K automotive bulb.
Larger ImagePhotorealistic rendering of the unlit appearance of a Sylvania 3157K automotive bulb.
Larger Image3D representation of an H7 headlamp bulb and its intensity distribution.
Larger ImageAn LED map lamp was optimized for uniformity over the high-lighted dashboard surface.
Larger ImageModel any illumination system with LightTools' powerful design, analysis, and optimization features.
Larger ImageAn H7 headlamp bulb from SOLIDWORKS that has been linked into LightTools.
Larger ImageA projector headlamp showing the pass/fail status of various test points in FMVSS 108.
Larger ImageThe rays show the light that propagates through a certain reflector and lens facet.
Larger ImageThe rays show the light that propagates through a certain reflector and lens facet.
Larger ImageThe length of the baffle/tube determines the amount of off-axis light that reaches the detector.
Larger ImageMontage of many aspects of projection system design: optics, coatings, performance, etc.
Larger ImagePhotorealistic rendering of a projection system and its image on a screen.
Larger ImageMontage showing the solid model of a DMD with the mirrors in the base and ON state.
Larger ImageRendering of the office with furniture and blinds.
Larger ImageRendering of white light passing through a highly dispersive dove prism.
Larger ImageRendering of a cellphone scene with an off-screen light source.
Larger ImageRendering of the difference in color temperature of LED vs. fluorescent lighting.
Larger ImageA rendering of a round brilliant cut diamond with a single overhead source.
Larger Image